Wi-Safe Connect
The WG-1 gateway allows for all devices utilising Wi-Safe 2 wireless communication to connect to the internet. The diagnostic information held within an individual WS2 device is sent directly to a personalised cloud based dashboard, where alerts can be managed and responses initiated.
Status reporting whenever you need it – all day, every day.
Remote Diagnostics
Wi-Safe Connect is ideal for those premises with a requirement for real time monitoring and status notification of domestic alarm installations. Information such as health of alarms, battery status, contamination levels and user engagement can be fed-back to live dashboards. All information is recorded and historical reports can be generated for future maintenance scheduling.
Our intuitive system is made up of a web-based installer wizard, user control dashboard and a push to app service
Installer Wizard
- Account creation
- Easy installation
- Build networks
- Locate and zone
- Diagnostics
- Network management
- Health summary
Administration System
- Account administration
- Manage accounts and email notifications
- Overview of all networks
- Supports hierarchical access rights
- Full alarm history reports
- Dedicated technical support
- Set risk levels
App
- Easy to use
- IOS & Android compatible
- Optional multi-user alerts
- Alarm status overview
- Real time notifications
- Real time reporting
- Monitor remotely away from home
Compatible Products
Wi-Safe 2 Thermoptek Smoke Alarm
WST-630
Our WST-630 Wi-Safe 2 Thermoptek smoke alarm can be used in conjunction with the Wi-Safe 2 range of products, including heat alarms, carbon monoxide alarms, and accessories such as the Low Frequency Sounder and the Vibrating Pad and Strobe.
- Wi-Safe 2 products can be interlinked to create a network, meaning if smoke triggers any alarm in the network, all other networked alarms and ancillary devices activate.
- It incorporates the groundbreaking Thermoptek™ technology, which provides responsiveness to all fire types in one alarm.
- Sealed for life 10 year sensor and power pack.
- Smart silence and locate feature.
- Up to 50 alarms can be linked in a single network.
- Wireless range up to 200m in clear sight.
- Certified to EN14604:2005 and LPCB approved.
Wi-Safe 2 Thermistek Heat Alarm
WHT-630
Our WHT-630 uses our innovative Thermistek heat sensing technology to provide a quicker reaction to danger if it senses a significant rate-of-rise in temperature. The
WHT-630 with Wi-Safe 2 allows wireless connection of up to 50 compatible devices, including smoke and CO alarms. The 10 year sealed for life battery negates the need to change the battery and reduces tamper risk, whilst the aesthetic low profile design complements modern homes and its single button test and silence feature makes it easy to use.
- Heat alarms should be used in application areas with high humidity, dusty environment or high ambient air temperature that are unsuited to standard smoke alarms which could cause false triggering. Primary examples include kitchens, laundry rooms or garages.
- Using our innovative Thermistek heat sensing technology the WHT-630 alarm provides a quicker reaction to danger if it senses significant rate-of-rise in temperature.
- The 10 year sealed for life battery negates the need to regularly change the battery and reduces tamper risk.
- The aesthetic low profile design complements modern homes and its single button test and silence feature make it easy to use.
- The WHT-630 with Wi-Safe 2, allows wireless connection of up to 50 compatible devices, including smoke and CO alarms. Once a device learned in to the network its alarm will sound if the network goes into alarm and pressing the test button on any of the devices will silence all but the initiating alarm. A Wi-Safe 2 network can include both hard wired mains and battery devices ensuring a complete domestic safety solution.
Wi-Safe 2, 10 Year CO Alarm
W2-CO-10X
Our W2-CO-10X, Wi-Safe 2 carbon monoxide alarm is a 10 year battery powered, sealed-for-life, wireless interlink CO alarm providing complete protection from CO poisoning in the home. The W2-CO-10X sends a wireless signal to all other Wi-Safe 2 products when it detects CO, giving an early warning and better chance of escape. This CO alarm is suitable for wall mounting or freestanding offering greater flexibility in positioning.
- The W2-CO-10X contains an advanced electrochemical sensor designed to accurately measure levels of CO.
- The micro-processor within the alarm has the ability to externally interrogate the data in the memory, to report both the status of the alarm together with the last 10 alarm events history, including when they happened and the CO level at the time of alarm. This is vital if a CO incident were to occur.
- This CO alarm is suitable for wall mounting or freestanding offering greater flexibility in positioning.
- Portable and light, the alarm is ideal for caravans, boats and holiday homes.
- Sealed for life 10 year power pack.
- Up to 50 alarms can be linked in a single network.
- Certified to BS EN 50291-1:2010 and BS EN 50291-2:2010.
Wi-Safe 2 Strobe and Vibrating Pad
W2-SVP-630
Our W2-SVP-630 mains powered Wi-Safe 2 combined strobe and vibrating pad is part of the Wi-Safe 2 range of products. To be used in conjunction with Wi-Safe 2 smoke and CO alarms, the flashing strobe and vibrating pad will be triggered to alert someone who may not be able to hear the audible alarm. The flashing strobe provides a visual warning for waking hours, while the vibrating pad is designed to be placed under a pillow or a mattress and is suitable for waking an individual to alert them when an alarm sounds.
The strobe is suitable for wall mounting or freestanding offering greater flexibility in positioning. Pressing the test button on the strobe will test smoke alarms in the network, which is ideal for people with limited physical ability.
- Uses Wi-Safe 2 technology to provide warning of fire or carbon monoxide (CO). Wi-Safe 2 products can be interlinked to create a network, meaning if smoke or CO triggers any alarm in the network, all other networked alarms and ancillary devices activate.
- Mains powered with a rechargeable battery back-up.
- The strobe is suitable for wall mounting or freestanding offering greater flexibility in positioning.
- Pressing the test button on the strobe will test smoke alarms in the network which is ideal for people with limited physical ability.
Wi-Safe 2 Low Frequency Sounder
W2-LFS-630
Our W2-LFS-630 mains powered Wi-Safe 2 low frequency sounder is part of the Wi-Safe 2 range of products. To be used in conjunction with Wi-Safe 2 smoke and CO alarms. The low frequency sounder has been specifically designed to provide additional protection to standard smoke alarms in the event of a fire. A low frequency signal is more likely to wake up high risk individuals such as children, those with mild to moderate hearing loss, older people and people under the influence of alcohol than a regular smoke alarm.
Emits a 520HZ square wave at a volume of 85dB at 3 metres and the red ‘alarm’ LED will also illuminate. Can be wall mounted horizontally or vertically or freestanding offering greater flexibility in positioning. Pressing the test button will test smoke alarms in the network which is ideal for people with limited physical ability.
- Uses Wi-Safe 2 technology to provide warning of fire or carbon monoxide (CO). Wi-Safe 2 products can be interlinked to create a network, meaning if smoke or CO triggers any alarm in the network, all other networked alarms and ancillary devices activate.
- Mains powered with a rechargeable battery back-up.
- Emits a 520HZ square wave at a volume of 85dB at 3 metres and the red ‘alarm’ LED will also illuminate.
- Can be wall mounted horizontally or vertically or freestanding offering greater flexibility in positioning.
- Pressing the test button will test smoke alarms in the network which is ideal for people with limited physical ability.